Fire Prevention and Safety Home ::

Instructions ::

Prevention and Safety During Surgical Procedures ::

Program Content ::

JCAHO Sentinel Event Alert ::

JCAHO Recommends ::

AORN Fire Position
Statement ::

NFPA 99 – Standard for Health Care Facilities ::

Fires Reported to ECRI ::

Root Causes of Fires ::

The Fire Triangle ::

Fuel Combustion ::

Ignition Sources ::

Fuel Sources ::

Oxidizers ::

Preparing for Fires ::

Preventing Fires ::

Control of Ignition Sources ::

Electrosurgery

Eschar

ESU power settings and activation times

Lasers

Fiberoptic Cables

Manage Fuels ::

Minimize Oxidizers ::

Endotracheal Tubes ::

Managing Fires ::

Conclusions ::

Program Summary ::

Take Test Now ::

Glossary ::

Bibliography ::

Suggested Readings ::

Covidien Energy-Based Professional Education ::

Eschar buildup on the active electrode can ignite, especially in an oxygen-enriched atmosphere. Furthermore, buildup increases resistance on the tip and can contribute to arcing. Consequently, eschar should consistently be removed from the active electrode tip. Use of a coated electrode facilitates removal of eschar. When using a coated electrode, however, always follow manufacturers recommended power settings to minimize fire risk.

< Previous | Next >

COVIDIEN, COVIDIEN with logo, Covidien logo, positive results for life are U.S. and/or internationally registered trademarks of Covidien AG. ©2009 Covidien. All rights reserved.