Fire Prevention and Safety Home ::

Instructions ::

Prevention and Safety During Surgical Procedures ::

Program Content ::

JCAHO Sentinel Event Alert ::

JCAHO Recommends ::

AORN Fire Position
Statement ::

NFPA 99 – Standard for Health Care Facilities ::

Fires Reported to ECRI ::

Root Causes of Fires ::

The Fire Triangle ::

Fuel Combustion ::

Ignition Sources ::

Fuel Sources ::

Oxidizers ::

Preparing for Fires ::

Preventing Fires ::

Control of Ignition Sources ::

Electrosurgery

Eschar

ESU power settings and activation times

Lasers

Fiberoptic Cables

Manage Fuels ::

Minimize Oxidizers ::

Endotracheal Tubes ::

Managing Fires ::

Conclusions ::

Program Summary ::

Take Test Now ::

Glossary ::

Bibliography ::

Suggested Readings ::

Covidien Energy-Based Professional Education ::

As previously discussed, activated light cables that have become detached from the light source or telescope have been known to ignite surgical drapes and gowns, as well as cause serious tissue burns. Consequently, always ensure that light sources are not activated until the light cable is connected to the scope or headlight. Likewise, ensure that light sources are deactivated before disconnecting the cord. Additionally, light cable connectors retain heat even after they are no longer illuminated. Thus, they should not be laid on the drapes.

< Previous | Next >

COVIDIEN is a trademark of Covidien AG. ©2008 Covidien AG or its affiliate. All rights reserved.