Fire Prevention and Safety Home ::

Instructions ::

Prevention and Safety During Surgical Procedures ::

Program Content ::

JCAHO Sentinel Event Alert ::

JCAHO Recommends ::

AORN Fire Position
Statement ::

NFPA 99 – Standard for Health Care Facilities ::

Fires Reported to ECRI ::

Root Causes of Fires ::

The Fire Triangle ::

Fuel Combustion ::

Ignition Sources ::

Fuel Sources ::

Oxidizers ::

Preparing for Fires ::

Preventing Fires ::

Control of Ignition Sources ::

Manage Fuels ::

Do not activate ignition sources in the presence of flammable agents

Flammable Agents

Evacuate surgical smoke/ Use water-based lubricants

Wet sponges/Insulated electrodes

Minimize Oxidizers ::

Endotracheal Tubes ::

Managing Fires ::

Conclusions ::

Program Summary ::

Take Test Now ::

Glossary ::

Bibliography ::

Suggested Readings ::

Covidien Energy-Based Professional Education ::

Avoid the pooling of prepping solutions, which could result in a chemical burn to the patient or a fire if the solution contains flammable agents. If a flammable agent is used, do not drape the patient until the vapors have dissipated from the surgical site. Activation of an electrosurgical generator or a laser in the presence of vapors will result in ignition.

A perioperative time-out period shall be conducted prior to the initiation of any surgical procedure using flammable liquid germicides or antiseptics to verify that a flammable germicide or antiseptic is dry, has not pooled and that any pooling has been corrected

< Previous | Next >

COVIDIEN is a trademark of Covidien AG. ©2008 Covidien AG or its affiliate. All rights reserved.